The Onyx Collection Banner

Standard Lavatories

Standard Lavatories are available in hundreds of sizes, 11 bowl styles, either Flat or Raised edge and also 5/8" or 1" thickness. Standard Lavatories can have one bowl (centered or offset) or two bowls. Click on the bowl style below to see all the available sizes.

A Standard Lavatory is one for which we already have a mold, and so it requires no special setup.

Standard Lavatories are categorized below by bowl style. If the lavatory you need is not specifically listed in this section, including anything with an Eclipse bowl, it is available as a custom lavatory. Please see our section on Custom Lavatories. More information on Standard Lavatories.

Transitional Bowl Styles
Recessed Oval Single Bowl
Recessed Oval Single Bowl
Other Options
Recessed Oval Single Bowl
Recessed Oval Single Bowl
Recessed Oval

Non-Recessed Oval Single Bowl
Non-Recessed Oval
Recessed Royale Single Bowl
Recessed Royale
Non-Recessed Royale Single Bowl
Non-Recessed Royale
Pacific Single Bowl
Wave Single Bowl
Milan Single Bowl
Atlantic Single Bowl

Olympic Single Bowl

Tahoe Single Bowl

ADA Single Bowl

25 x 25 Corner Single Bowl
25 x 25 Corner

Offset Bowl Standard
Offset Bowl Style
(10 Bowl Styles Available)

Double Bowl Standard
Double Bowl Style
(10 Bowl Styles Available)

Non-Recessed Tuscan Single Bowl

Non-Recessed Tuscan Single Bowl


Edge Styles

5/8" Thick Raised Edge
(standard & custom)
5/8" Thick Flat Edge
(standard & custom)
1" Thick Flat Edge
(standard & custom)

Lavatory Drain Recommendations
We recommend using tapered-thin drains - see comparison below

Comparison Angled-thin Drain Flat-thick Drain
Drain Comparison
Angled-thin Drain Tapers
Flat-thick Drain Traps Water
Drain Comparison

Flat-thick Drain vs. Tapered-thin Drain
Tapered-thin Drain Tapers

Tapered-thin Drain is flush with the lavatory bowl
and tapers down to allow the water to flow
Flat-thick Drain Traps Water

Flat-thick Drain is flat which causes
it to trap water around the drain

Product Certification: ANSI standard, and ASTM E-84 Flame test results