Proudly made in
Kansas, USA

Custom Shaped Lavatories

Below are drawings of some common shaped custom lavatory designs. Custom lavatories can be any length, depth, or shape and can incorporate any of our bowl styles and edge styles. The possibilities are endless. 

Please specify faucet hole spacing when ordering: 4″ is typical for a one-piece faucet set; 8″ is used for  three piece sets. We can also do single holes, and even add an extra hole for a soap dispenser if requested.

Very complicated shapes may require a Template. To learn about making Templates, click here

Traditional Bowl Styles

Quincy
Oval Non-Recessed
ADA

Transitional Bowl Styles

Caribbean
Venetian
Wave
Olympic
Tuscan
Norway
Malibu

Contemporary Bowl Styles

Atlantic
Café
Daytona

"Common" Custom Designs

Offset Lavatory
Tapered End
Radius Corner
Winged Design with Two ore More Bowls
Banjo Design
135° Angle
Bowed Front
Two or More Bowls
Winged Design with Bowed Center
Winged Design with Beveled Center
135° with Tapered Front
Two or More Bowls
Winged Design
Rounded Banjo
Custom Corner
Double 135° Angle
90° Angle
90° with Corner Span
Inverted 90° Angle

Lavatory Drain Recommendations
We recommend using tapered-thin drains – see comparison below

Comparison

Flat-thick Drain vs. Tapered-thin Drain

Angled-thin Drain

Tapered-thin Drain is flush with the lavatory bowl and tapers down to allow the water to flow

Flat-thick Drain

Flat-thick Drain is flat which causes it to trap
water around the drain