Custom Lavatories

Below are drawings of some common custom lavatory designs.  Custom lavatories can be any length, depth, thickness, or shape and can incorporate any of our bowl styles and edge styles.  The possibilities are endless... if you can dream it, we can make it.

Please specify faucet hole spacing when ordering: 4" is typical for a one-piece faucet set; 8" is used for three piece sets. We can also do single holes, and even add an extra hole for a soap dispenser if requested.

Very complicated shapes may require a Template.
To learn about making Templates, click here.


Traditional Bowl Styles
Transitional Bowl Styles
Contemporary Bowl Styles
Other Bowl Styles

Edge Styles
Flat Raised (No-Drip) Ogee
Beveled (Chamfer) 1" Thick Flat 1.5" Thick Flat

"Common" Custom Designs
Offset Lavatory Bowl
Offset Lavatory
Tapered End
Tapered End
Radius Corner
Radius Corner
Winged Design with Two or More Bowls
Winged Design with Two or More Bowls

Banjo Design
Banjo Design
135 Degree Angle
135° Angle
Bowed Front
Bowed Front
Two or More Bowls
Two or More Bowls

Winged Design with Bowed Center
Winged Design with Bowed Center
Winged Design with Beveled Center
Winged Design with Beveled Center
135 Degree with Tapered Front
135° with Tapered Front
Inverted 135 Degree Angle
Inverted 135° Angle

Winged Design
Winged Design
Rounded Banjo
Rounded Banjo
Custom Corner
Custom Corner
Double 135 Degree Angle
Double 135° Angle

90 Degree Angle
90° Angle
90 Degree with Corner Span
90° with Corner Span
Inverted 90 Degree Angle
Inverted 90° Angle

Lavatory Drain Recommendations
We recommend using tapered-thin drains - see comparison below
Comparison
Drain Comparison
Drain Comparison
Flat-thick Drain vs. Tapered-thin Drain
Angled-thin Drain
Angled-thin Drain Tapers
Tapered-thin Drain Tapers
Tapered-thin Drain is flush with the lavatory bowl and tapers down to allow the water to flow
Flat-thick Drain
Flat-thick Drain Traps Water
Flat-thick Drain Traps Water
Flat-thick Drain is flat which causes it to trap water around the drain